Electrospun Nanofiber Blend With Improved Mechanical and Biological Performance [Corrigendum]

Lobo AO, Afewerki S, de Paula MM, et al. Int J Nanomedicine. 2018;13:7891—7903.

The authors have advised that due to an error at the time of figure assembly, Figure 2 on page 7894 is incorrect. Images in Figures 2G–I were inserted incorrectly due to mislabeling of the image files. A revised Figure 2G–I have been inserted to address this issue. The correct Figure 2 is as follows.

Figure 2 (A–I) Morphology of electrospun fibers from the SEM analysis: (A–C) PCL-PEG, (D–F) PCL-PEG-GelMA, and (G–I) PCL-PEG-GelMA-UV fibers. (J–L) The distribution of the fiber diameters for (J) PCL-PEG, (K) PCL-PEG-GelMA, and (L) PCL:PEG:GelMA-UV fibers. Abbreviations: GelMA, gelatin methacryloyl; PCL, polycaprolactone; PEG, poly(ethylene glycol); SEM, scanning electron microscopy.

The authors apologize for this error.

Read the original article

© 2025 The Author(s). This work is published and licensed by Dove Medical Press Limited. The full terms of this license are available at https://www.dovepress.com/terms.php and incorporate the Creative Commons Attribution - Non Commercial (unported, 3.0) License. By accessing the work you hereby accept the Terms. Non-commercial uses of the work are permitted without any further permission from Dove Medical Press Limited, provided the work is properly attributed. For permission for commercial use of this work, please see paragraphs 4.2 and 5 of our Terms.